What Is The Production Process Of Ice Cream Sticks Like?

Nov 28, 2022

Leave a message

1. Soaking: Soaking the logs in the heated water for 8 hours to soften them.

2. Sawing: According to the daily production plan, sawing the timber to the required sizes.

3. Bark removing: Remove the bark after sawing

4. Slicing: Slice the wood block into a long strip and slice with a slicing machine.

5. Punching: Punch the slice strip to the required shape by punching the machine.

6. Drying and Polishing: Load the semi-products into the huge cylinder for drying for over 6 hours at over 100 degrees Celsius. Move dry sticks to the roller for polishing.

7.1st sorting: Initial sorting to different grades by the sorting machine. (mainly remove waste material)

8. Chamfering (optional): Edge chamfered by chamfering machine.

9. Re-Polishing: Move chamfered sticks to the roller for polishing again.

10.2nd sorting: Sort and separate sticks by grades manually.

11. Hot-stamping (optional): Brand the required logo or characters on sticks by hot-stamping machine.

12. Bundling: Keep sticks in order and bundle by the paper bundle or manually.

13. Packing (optional): According to the requirements, individual paper wrapping, pack by zipper bag, poly bag, or paper box are available.

14. Cartoning: To avoid moisture, put a polybag inside the carton before loading sticks into it.

15. Storage: Pile the cartons on pallets and store the finished products in the warehouse.

16. QC: Inspect the final products randomly before shipping. (3% of ordering q'ty)

17. Shipping: Loading the cartons into a container and delivering them to Xingang Tianjin port for shipping.


Send Inquiry